FEATURES OF THE BOSCH LED REMOTE CONTROL UNIT FOR SMART SYSTEM

Bosch e-bike control unit
Control centre for the entire e-bike
Display of battery status & selected assistance level
Switching between riding modes & operating the front light
Pairing of the smartphone via Bluetooth
Optional control of the Kiox 300 Smart System Display

EVERYTHING UNDER CONTROL: THE BOSCH SMART SYSTEM CONTROL UNIT

With the Bosch Smart System, the complete intelligence of your e-bike is located in the LED remote control unit. This allows you to move your electric bike exclusively with the compact remote control on the handlebars. It not only makes for a simple and tidy cockpit, but also simplifies repairs and maintenance. As usual, the various support levels can be freely selected via the buttons. The coloured LED strip always lets you know exactly which mode you are in. The current battery status is also constantly displayed. You can also connect your smartphone effortlessly via Bluetooth. With the appropriate Bosch eBike Flow app, you can then optimally adapt your Bosch Smart System drive to your needs.

MOUNTING THE BOSCH LED REMOTE

When designing and developing the control unit for the Smart System, Bosch placed the highest value on usability and comfort. Bosch has conceived the design together with the ergonomics experts from SQlab. For mounting, you only need the LED Remote holder. You can mount it as desired in front or behind the brake lever. When aligning the control unit, just make sure that the plus and minus buttons are perpendicular to the ground. The LED Remote has a built-in battery. This ensures that you can switch on your e-bike. After longer downtimes, this may need to be recharged via the USB-C interface. Normally, however, the charging is taken over by the e-bike battery. In the event of a defect, the LED remote battery can also be replaced (Torx bit required). The connection to the Smart System motor is made via the matching Bosch display cable. This is available in many different lengths to match your e-bike.

COLOUR SCALE OF THE LED CONTROL UNIT FOR BOSCH SMART SYSTEM

The Smart System LED Remote has a sophisticated display. The different LEDs and colours provide all the important information about your e-bike. The support levels are displayed as gray for support off, green for Eco, blue for Tour, purple for EMTB and red for Turbo. A blue battery bar also corresponds to 20% battery capacity - a white 10%. From a state of charge of the e-bike below 30%, the bars are displayed as orange. If the LEDs of the battery indicator light up red, only 10% remaining battery is available. If the indicator flashes red the battery is empty and only has energy left to operate the lighting system. Critical error messages can be recognized by a completely red LED control unit. If the remote is completely orange, there is a non-critical error. If necessary, you can get more information and help via the Bosch E-Bike Flow app.

Specifications

Bosch, LED, Remote, BRC3600, Smart System, 4054289005528, EB13.100.00E,