Presenting the Smashpot - a fork coil spring conversion system for single crown enduro forks, featuring externally adjustable hydraulic anti-bottoming technology to deliver precisely the amount of bottoming resistance you need. The benefits of coil are clear: if your first priority for your fork is outright performance and grip, get yourself a Smashpot.

Features

• Catering to rider weights from 45kg (100lbs) to 125kg (275lbs) with 11 coil spring rates
• Allows lighter riders to get the most use out of their forks, and heavier riders the support they need without excessive air pressures
• Only coil conversion system on the market allowing 180mm travel (Please note that 190mm is not possible with the Zeb)
• Easily adjust your travel with internal spacers (please note the minimum & maximum travel of your fork as determined by manufacturer)
• Unique Hydraulic Bottom-out System reduces harshness
• Can be transferred between different forks with minimal parts /cost (a purchase of a new top cap or foot stud)
• Reliable and low maintenance, set and forget. User installable and serviceable
• Weight increase of approximately 250-450g (dependent on spring rate and fork's existing spring system)

Why Coil?

Air springs have improved substantially over the years - and we've been at the forefront of air spring development for years, so we've got no bridges to sell you. Yeah, coils are heavier than air, and for some riders that alone is a dealbreaker - fair enough. The advantages of coil springs, however, are clear:

Zero stiction or friction in a coil spring. And no moving seals in the spring system to wear out, cause friction or leak.

Zero spring rate variation allowing more mid-stroke support and consistency.

More oil in the fork - lubrication and service life are improved.

In short, improvements in sensitivity, grip, compliance, mid-stroke support and consistency, with reductions in harshness and hand pain.